YS/T 509.6-2008 锂辉石、锂云母精矿化学分析方法 五氧化二磷量的测定 钼蓝分光光度法

作者:标准资料网 时间:2024-05-23 00:59:38   浏览:9826   来源:标准资料网
下载地址: 点击此处下载
基本信息
标准名称:锂辉石、锂云母精矿化学分析方法 五氧化二磷量的测定 钼蓝分光光度法
英文名称:Methods for chemical analysis of spodumene and lepidolite concentrates-Determination of phosphorus pentoxide content-The molybdenum blue photometric method
中标分类: 冶金 >> 有色金属及其合金产品 >> 稀有轻金属及其合金
ICS分类: 冶金 >> 有色金属 >> 其他有色金属及其合金
替代情况:替代YS/T 509.7-2006
发布部门:国家发展和改革委员会
发布日期:2008-03-12
实施日期:2008-09-01
首发日期:
作废日期:
提出单位:全国有色金属标准化技术委员会
归口单位:全国有色金属标准化技术委员会
起草单位:新疆锂盐厂
起草人:季娟娟、夏淑芬、王克俊、刘佩君
出版社:中国标准出版社
出版日期:2008-09-01
页数:6页
适用范围

本部分规定了锂辉石、锂云母精矿中五氧化二磷含量的测定方法。
本部分适用于锂辉石、锂云母精矿中五氧化二磷含量的测定。测定范围:0.01%~1.00%。
本部分代替YS/T509.7-2006《锂辉石、锂云母精矿化学分析方法 钼蓝光度法测定五氧化二磷量》(原GB/T3885.7-1983)。
本部分与YS/T509.7-2006相比主要有如下变动:
---将3.7中置于烧杯中改为置于250mL 烧杯中;
---对文本格式进行了重新编辑;
---补充了质量保证和控制条款,增加了重复性条款。

前言

没有内容

目录

没有内容

引用标准

没有内容

所属分类: 冶金 有色金属及其合金产品 稀有轻金属及其合金 冶金 有色金属 其他有色金属及其合金
下载地址: 点击此处下载
【英文标准名称】:Plainbearings-Hydrostaticplainjournalbearingswithdrainagegroovesundersteady-stateconditions-Part1:Calculationofoil-lubricatedplainjournalbearingswithdrainagegrooves
【原文标准名称】:滑动轴承静态条件下带有排泄槽的液压滑动轴颈轴承第1部分:带有排泄槽的润滑油滑动轴颈轴承的计算
【标准号】:ISO12167-1-2001
【标准状态】:现行
【国别】:国际
【发布日期】:2001-12
【实施或试行日期】:
【发布单位】:国际标准化组织(IX-ISO)
【起草单位】:ISO/TC123
【标准类型】:()
【标准水平】:()
【中文主题词】:润滑系统;排水;沟;流体静力学(水);计算方法;径向滑动轴承;径向轴承;储存;滑动轴承;润滑油;限制条件;润滑;数学计算;单位;轴承;液体静压;荷载能力;符号;术语
【英文主题词】:Bearings;Boundaryconditions;Drainage;Grooves;Hydrostatic;Hydrostatics;Loadcapacity;Lubricatingoils;Lubricatingsystems;Lubrication;Mathematicalcalculations;Methodsofcalculation;Plainbearings;Radialbearings;Radialplainbearings;Storage;Symbols;Terms;Units
【摘要】:ThispartofISO12167appliestohydrostaticplainjournalbearingsundersteady-stateconditions.InthispartofISO12167onlybearingswithoildrainagegroovesbetweentherecessesaretakenintoaccount.Ascomparedtobearingswithoutoildrainagegrooves,thistypeneedshigherpowerwiththesamestiffnessbehaviour.
【中国标准分类号】:J11
【国际标准分类号】:21_100_10
【页数】:31P.;A4
【正文语种】:英语


MIL-DTL-16878G, DETAIL SPECIFICATION: WIRE, ELECTRICAL, INSULATED, GENERAL SPECIFICATION FOR (11 AUG 2000) [SUPERSEDING MIL-W-16878F]., This specification covers unshielded wire for hookup and lead wiring of electrical and electronic components and equipment. The temperature rating of wire under this specification ranges from -65 to 260 degrees Celsius (癈), with potential rating from 250 to 5,000 volts root mean square (Vrms).